OMER KAR LIFT Pantograph – KAR100/200/300/400 SERIES
Exclusive “Volumetric” control eliminates the need for electronic sensors – Stays level all the time.
Available in surface, recessed floor or full flush mounted installations
Patented “AOS” Energy absorbing system eliminates the need for sliding legs at the base or under runways
Built to higher quality standard; made by O.ME.R Lifts, a world leader in Heavy Duty lifts for over 20 years in an IS0 9001 facility.
Electro-hydraulic pantograph lift, vertical lifting, uncluttered ground, ideal for maintenance and lifting of buses, motorcoach, trucks and vehicles of a heavy capacity. With sturdy and compact structure, this lift presents a perfectly stable lane, synonymous of safety and long term reliability. No base and no mechanical connection on ground, these are the main characteristics of the lift structure which grants maximum freedom of movement under the lane and on the front area.
Safety devices:
• Mechanical locks on each lifting cylinder
• Burst valve on each lifting slave cylinder
• Qty 5 max. overpressure valves
• Photo sensors for runways leveling control
• Acoustic warning and by-pass key when lift reaches 500 mm. from collapsed position
• Low voltage commands
• Dead man control
KAR CLOUD & ECL MODELS | CAPACITY | POWER SUPPLY | LENGTH | RUNWAY
WIDTH |
COLLAPSED
HEIGHT |
RAISED
HEIGHT |
APPROACH RAMP LENGTH | LIFT TIME | SHIP
WEIGHT |
CLOUD 140
SERIES |
31,000 lb. | 10HP / 7.5 kw – 208/440v 3 phase 60hz | 20’, 23’, 26’, 30’, 33’, 36’ | 30” | 14.2” | 79” | 104” | 75 | 10 to 15,000 lb. |
CLOUD 170
SERIES |
37,000 lb. | 10HP / 7.5 kw – 208/440v 3 phase 60hz | 20’, 23’, 26’, 30’, 33’, 36’ | 30” | 14.2” | 79” | 104” | 75 | 10 to 15,000 lb. |
CLOUD 190
SERIES |
42,000 lb. | 10HP / 7.5 kw – 208/440v 3 phase 60hz | 20’, 23’, 26’, 30’, 33’, 36’ | 30” | 14.2” | 79” | 104” | 75 | 10 to 15,000 lb. |
CLOUD 230
SERIES |
51,000 lb. | 10HP / 7.5 kw – 208/440v 3 phase 60hz | 20’, 23’, 26’, 30’, 33’, 36’ | 30” | 14.2” | 79” | 104” | 75 | 10 to 15,000 lb. |
CLOUD 290
SERIES |
64,000 lb. | 10HP / 7.5 kw – 208/440v 3 phase 60hz | 20’, 23’, 26’, 30’, 33’, 36’ | 30” | 14.2” | 79” | 104” | 75 | 10 to 15,000 lb. |
ECL
250 SERIES |
55,000 lb. | 10HP / 7.5 kw – 208/440v 3 phase 60hz | 20’, 23’, 26’, 30’, 33’, 36’39’, 47’ | 30” | 14.2” | 80.3” | 104” | 75 | 14 to 21,000 lb. |
ECL
300 SERIES |
66,000 lb. | 10HP / 7.5 kw – 208/440v 3 phase 60hz | 20’, 23’, 26’, 30’, 33’, 36’39’, 47’ | 30” | 14.2” | 80.3” | 104” | 75 | 14 to 21,000 lb. |
ECL
350 SERIES |
77,000 lb. | 10HP / 7.5 kw – 208/440v 3 phase 60hz | 20’, 23’, 26’, 30’, 33’, 36’39’, 47’ | 30” | 14.2” | 80.3” | 104” | 75 | 14 to 21,000 lb. |
ECL
400 SERIES |
88,000 lb. | 10HP / 7.5 kw – 208/440v 3 phase 60hz | 20’, 23’, 26’, 30’, 33’, 36’39’, 47’ | 36” | 15.2” | 82.6” | 104” | 85 | 18 to 26,000 lb. |
ECL
450 SERIES |
99,000 lb. | 10HP / 7.5 kw – 208/440v 3 phase 60hz | 20’, 23’, 26’, 30’, 33’, 36’39’, 47’ | 36” | 15.2” | 82.6” | 104” | 85 | 18 to 26,000 lb. |
Warranty: Two years parts – One year labor – Ten years hydraulic cylinders & structure (parts only)
Factory installed LED shatterproof lighting – OMA-LEDLK
Runway traction surface – OMA- RTS
Stainless steel water resistant control NEMA 4 – OMA-GLWRCTL
FL120-2 26,000 lb. capacity Air/Hydraulic jacking beam – OMA-JB12-26TM-C
FL160-2 35,000 lb. capacity Air/Hyd. jacking beam – OMA-JB16-35TM-C
FL200-2 44,000 lb. capacity Air/Hyd. jacking beam – OMA-JB20-44TM-C
Factory installed built in jack beam track – NPN
Factory installed runway air outlets – OMA-RAO-C
Runway foot shut off guards – OMA-RFG
Runway extension with alignment radius plate recessed pocket – NPN
Drive through option NPN
100% Hot dipped galvanized – OMA-GLS
Hot Dip Galvanize Runway only with zinc primer + paint on balance of lift – NPN
Complete washday package c/w galvanizing of lift & control, stainless steel lines/anchors & hardware – IP 65 NEMA 4 – OMA-WASHBAY
Stainless steel foot guards – OMA-RFG-SS