OMER KAR LIFT Pantograph – KAR82
Built to higher quality standard; made by O.ME.R Lifts, a world leader in Heavy Duty lifts for over 20 years in an IS0 9001 facility.
Electro-hydraulic pantograph lift, vertical lifting, uncluttered ground, ideal for alignment, maintenance and lifting vehicles of a medium capacity. With sturdy and compact structure, this lift presents a perfectly stable lane, synonymous of safety and long term reliability. No base and no mechanical connection on ground, these are the main characteristics of the lift structure which grants maximum freedom of movement under the lane and on the front area.
Safety devices:
- Mechanical locks on each lifting cylinder
- Burst valve on each lifting slave cylinder
- Qty 5 max. overpressure valves
- Photo sensors for runways leveling control
- Acoustic warning and by-pass key when lift reaches 500 mm. from collapsed position
- Low voltage commands
- Dead man control
- Premium Siemens 3HP / 2.2kw motor and BOSCH pump.
- Superior structural strength provides longer life and more precise alignments – Multipiece boxed style runway structure will not flex or sag. Purpose built hollow structure lifting legs.
- Greater flexibility with more models to choose from – Available in surface or flush mounted, alignment or service deck. Optional 9,000lb. runway lifting tables with standard jacking beam rails provided.
- Premium options and accessories can expand the capabilities and service life – Stainless steel radius plates, built in tire inflation hoses, removable work steps, LED runway lighting and premium heavy duty extended life 5 year warranty HD jacking beams
- Lower maintenance costs -steel components are wheel-a-brator shot blasted and acid washed before a “double bake” powder coat finish is applied. Zirk style grease fittings at all hinge points. Optional Hot Dip galvanizing of complete structure for extreme conditions.
- Precision levelling feature provides more accurate alignments – exclusive “volumetric” control maintains level to within less than 1/4”. No electronic sensors are required on the lift or PLC/PC Board. No fault codes are required.
- Low pressure hydraulics provides longer life -four low pressure inverted cylinders are mounted under the runway for protection. Cylinders operate at <3800psi/260bar at full capacity.
- Designed for greater technician productivity – there are no obstructions between the runways or base frame. The lift rises 81” in 71 seconds with 18 locking positions. Built in runway compressed air outlets front and rear.
Exclusive “Volumetric” control eliminates the need for electronic sensors – Stays level all the time.
Built in Pneumatic Rear Slip Plates
9.000lb. Lifting Tables
Available in surface, recessed floor or full flush mounted installations
Patented “AOS” Energy absorbing system eliminates the need for sliding legs at the base or under runways
SPECIFICATIONS | |
Capacity | 18,000 lb. (also available in 16,000lb. and 12,000lb.) |
Overall Length (Surface Mounted) | 259.1”, 275.6” or 291.3” |
Runway Lengths | 17’, 18’ or 20’ |
Runway Width | 25.6” |
Overall Width | 87.4” to 98” |
Collapsed Height | 11.4” |
Lifting/Lowering Time | 70 sec. |
Raised Height | 81” |
Length of Rear Slip Plates | 91.1” |
Maximum 4-wheel alignment | 185”, 197” or 205” |
Minimum 4-wheel alignment | 75.5” |
Maximum Service Wheel Base | 196”, 208” or 224” |
Certification | ALI Certified – ANSI AL CTV 2011 |
ISO Certified Factory | Yes |
Control | Volumetric Hydraulic/Mechanical |
Synchronization | Hydraulic Displacement with Torsion Bar |
Noise Level | < 75 decibels |
Power Requirement | 220 volt single phase 60hz – 20amp |
Shipping Weight | 5,960 lbs. |
Finish | Double Bake Powder Coat (optional Hot Dip Galvanizing) |
Power Requirement | 3HP/ 2.2kw – 116psi/ 8 bar |
Factory installed LED shatterproof lighting – OMA-LEDLK
Runway traction surface – OMA- RTS
Premium 9,000lb. Jacking Beams
Optional Flush Mount, Drive Through or Service
Factory installed built in jack beam track – NPN
Factory installed runway air outlets – OMA-RAO-C